Crushed Leg Incident Costs Company $370k

It comes as a Hawkes Bay steel plate cutting company was fined following a November 2017 incident in which a worker’s leg was crushed by a package of steel being moved by a gantry crane. The worker’s right leg had to be amputated below the knee as a result.

A WorkSafe investigation found that although C.N.C. Profile Cutting Services Limited had health and safety documentation relating to moving packages using the gantry crane, they were outdated in some cases back to 2003.

WorkSafe Investigation Area Manager Casey Broad says the documentation was generalised and did not include a safe system of work document for the method being used in this case known as ‘slinging’.

“There was too much reliance on on-the-job training and instruction to manage hazards.

“There had been an earlier near miss incident with the system and involving the victim, and that should have been a warning to the business that their systems needed review and updating.”

The victim was moving a 2289 kg package of steel to a laser cutter using his body weight to counterbalance the load. As the victim lowered the heavy end of the package to the ground the whole package tilted to an almost vertical position and slipped out of the strop holding it and fell trapping his right ankle and foot.

“Effective hazard identification and management, good training, and supervision of risky work were not being employed by the company and as a result, the victim has suffered life-changing injuries that should not have happened,” says Broad.

• The company was sentenced on Friday 21 May at the Hastings District Court.
• A fine of $275,000 was imposed.
• Reparations of $87,497.70 and costs of $7,380.58 were ordered.
• C.N.C. Profile Cutting Services Ltd was sentenced for charges laid under sections 36(1)(a), 48(1) and (2)(c) of the Health and Safety at Work Act 2015.
• Being a PCBU, having a duty to ensure, so far as reasonably practicable, the health and safety of workers who work for the PCBU, including the victim, while the workers were at work in the business or undertaking, namely while operating the overhead gantry crane to sling, lift and transport packets of sheet steel, did fail to comply with that duty and that failure exposed the workers to a risk of death or serious injury, arising from exposure to a crushing hazard created by inadequate securing of the packets.
• Maximum penalty – $1,500,000.

© Scoop Media