Fujitsu & KDDI Research successfully implement large-capacity multiband wavelength multiplexing transmission

Fujitsu and KDDI Research successfully implement large-capacity multiband wavelength multiplexing transmission with installed optical fiber

Realizing 5.2 times multiplexed wavelength transmission in comparison with current commercial optical transmission technology

TOKYO, Dec 4, 2023 - (JCN Newswire) - Fujitsu Limited and KDDI Research today announced that they have successfully developed a large-capacity multiband wavelength multiplexing transmission technology using installed optical fibers.

The two companies have developed a technology that enables transmission of wavelength bands other than the C band, which has not been used in medium- and long-distance commercial optical communications, using a batch wavelength conversion and multiband amplification technology. The optical fiber communications network introduced with this technology enables wavelength transmission at 5.2 times the wavelength multiplicity of current commercial optical transmission technology. This enables the use of installed optical fiber facilities to increase communication traffic in a cost-effective and labor-efficient manner. The technology makes it easier to expand the transmission capacity in urban areas and densely populated residential areas where installation can prove challenging, and offers the potential to significantly reduce the time required to start the service and reduce costs.

The development was undertaken as part of the ”Research and Development Project of the Enhanced Infrastructures for Post-5G (1) Information and Communication Systems” (2) commissioned by Japan’s New Energy and Industrial Technology Development Organization (NEDO).

Figure 1: Image of the system applying high-capacity multiband wavelength multiplexing transmission technologyProject background

Amidst growing demand for services that leverage IoT, artificial intelligence (AI), and big data analysis, NEDO aims to strengthen the development and manufacturing base of Japan's post-5G information and communications systems by developing core technologies for post-5G information and communications systems. As part of this effort, from October 2020 to October 2023, Fujitsu and KDDI Research engaged in a project to enhance the performance of post-5G optical networks. Conventional commercial optical fiber communication networks use single-mode fibers in which light passes only through the center of the optical fiber, and use the C band (wavelength band: 1,530 nm to 1,565 nm) (3) as the signal transmission band of the optical network. However, as the amount of communication traffic increases, the C band alone is expected to have insufficient transmission capacity. To increase the transmission capacity per fiber, the two companies aimed to increase the wavelength band used from the C band to the L band (1,565 nm to 1,625 nm), the S band (1,460 nm to 1,530 nm), the U band (1,625 nm to 1,675 nm), and the O band (1,260 nm to 1,360 nm), with the aim of making it multi-band.

Project results

As part of the project, Fujitsu built a simulation model that accounts for the degradation factors of transmission performance in multiband transmission, enabling the transmission design of multiband wavelength multiplexing systems. The simulation model reflects the measurement results of the commercial optical fiber characteristics and the transmission parameters extracted by the experimental system verification of the integrated wavelength converter/multiband amplifier. Using this model, Fujitsu realized high-precision simulations that reduce errors from the actual measurement to within 1dB, making it possible to take into account the interaction between bands and the degradation of transmission performance. KDDI Research’s research has made it possible to utilize twice the frequency bandwidth of the conventional C band in the O band, which has never been utilized in high-density wavelength division multiplexing (DWDM (4) ) transmission. Combining both technologies, the two companies conducted actual transmission experiments using existing optical fibers and demonstrated multiband wavelength multiplexed transmission (transmission distance 45 km) in the O, S, C, L, and U bands (Figure 2), proving that wavelength transmission is possible at 5.2 times the wavelength multiplicity of conventional C-band-only transmission. The two companies also confirmed multi-band wavelength multiplexing transmission (transmission distance 560 km) in the S, C, L and U bands in the simulation.

Below is a description of the major research findings:

Figure 2: Received optical spectrum of a single installed fiber when the O, S, C, L, and U bands are transmitted simultaneously

1. Establishment of multiband dense wavelength division multiplexing (DWDM) transmission technology

In the conventional design of a transmission system in the C band, parameters that could be treated as constants would not have practical problems, but in the case of multiband transmission over the S band + C band + L band + U band, the difference in transmission performance between the wavelength bands cannot be ignored, and a design that takes into account the wavelength dependence is required. For example, nonlinear degradation factors become more pronounced as the optical power input to the transmission line increases and as the transmission distance increases, thereby limiting transmission performance. In particular, stimulated Raman scattering (5), cross-phase modulation (6), and four-wave mixing (7) caused by the interaction of light with multiple wavelengths are prominent at high wavelength multiplicities, which greatly affect the transmission performance of multiband wavelength multiplexing systems.

In this project, Fujitsu and KDDI Research established a design method for multi-band wavelength multiplexing systems by constructing a simulation model that takes into account the interaction between different bands and degradation factors in transmission performance. In addition, since wavelength division multiplexing (WDM) optical signals in the S and U bands are generated by all-optical signal processing technology from optical signals in the C and L bands, respectively, there is no need to use transmitters and receivers dedicated to the S and U bands. The integration of these technologies has enabled DWDM transmission in the S band + C band + L band + U band using coherent transmission technology, which leverages the phase of light, thus enabling high-speed and high-capacity communication.

2. Establishment of coherent DWDM transmission technology in O band

Traditionally, coherent transmission technology has a tendency to distort O-band transmission signals due to the influence of other optical signal components. Moreover, non-linear noise, which often arises in the O-band, is generally difficult to eliminate with digital signal processing technology, thereby diminishing the overall system performance. As a result, applying coherent transmission technology in the O band has been challenging. Minimization of nonlinear noise in the O band is possible by appropriately setting the transmitted optical power for each densely multiplexed wavelength signal. This approach minimized the effects of nonlinear noise and achieves coherent DWDM transmission over 9.6 THz in the O band, even if the process of signal compensation on the transmitter side and wavelength dispersion compensation on the receiver side was omitted. The O band, which is a wavelength band near zero dispersion, is less affected by wavelength dispersion (8) and has the advantage of reducing the load on digital signal processing and improving energy efficiency.

[1] Post-5G :It is the mobile communication system which enhanced the feature of ultra-low latency and multiple simultaneous connections of 5th generation mobile communication system (5G).
[2] Project :Project name (JPNP20017): Research and Development Project of the Enhanced Infrastructures for Post-5G Information and Communication Systems (commissioned by the New Energy and Industrial Technology Development Organization (NEDO)).
[3] C band :Conventional-band abbreviation. This refers to the 1530~1565 nm wavelength band used for optical communication.
[4] DWDM :An acronym for Dense Wavelength Division Multiplexing, it is a method for densely multiplexing wavelengths in WDM (Wavelength Division Multiplexing) technology that increases transmission density by multiplexing multiple optical signals of different wavelengths onto a single beam of light.
[5] Stimulated Raman scattering :A phenomenon in which a strong optical signal (pump light) propagating through an optical fiber excites molecules in the glass material of the fiber, resulting in the generation of new light (Stokes light). This Stokes light has a lower frequency than the pump light and propagates in the same direction. Stimulated Raman scattering typically contributes to noise in high-power optical signal transmission and affects communication quality.
[6] Cross-phase modulation :Multiple optical signals propagating in an optical fiber affect each other, changing the phase of each signal. Specifically, a change in the intensity of one optical signal (optical pulse) changes the phase of other optical signals propagating in the same optical fiber. This phase modulation is caused by the nonlinearity of the optical fiber. Cross-phase modulation can cause signal distortion and interference in systems where multiple optical signals propagate simultaneously, such as DWDM systems.
[7] Four-wave mixing :Multiple light waves propagating in an optical fiber interact to generate new light waves. This new light wave propagates at the same speed and in the same direction as the original light wave, but its frequency is determined by the combination of the frequencies of the original light waves. Four-wave mixing is caused by optical fiber nonlinearities, especially in the presence of high-power optical signals or closely spaced optical signals (e.g., DWDM). This can cause signal distortion and interference, affecting the performance of optical communication systems.
[8] Wavelength dispersion :A phenomenon in which the speed of light waves propagating through optical fibers varies depending on the wavelength.About Fujitsu

Fujitsu’s purpose is to make the world more sustainable by building trust in society through innovation. As the digital transformation partner of choice for customers in over 100 countries, our 124,000 employees work to resolve some of the greatest challenges facing humanity. Our range of services and solutions draw on five key technologies: Computing, Networks, AI, Data & Security, and Converging Technologies, which we bring together to deliver sustainability transformation. Fujitsu Limited (TSE:6702) reported consolidated revenues of 3.7 trillion yen (US$28 billion) for the fiscal year ended March 31, 2023 and remains the top digital services company in Japan by market share. Find out more: www.fujitsu.com.

About KDDI Research

KDDI Research, the core of the KDDI Group's research and development efforts, promotes research activities at two bases, namely, the Advanced Technology Laboratories and the KDDI research atelier, with the aim of creating new lifestyles whilst resolving various social issues. As a research institute for a telecommunications company, we will continue our challenges to establish a prosperous and people-friendly society by creating new value. Find out more: https://www.kddi-research.jp/english/.

© Scoop Media